High Temperature 130°C -160°C Adhesives , Translucent 0.12mm * 50CM * 100Yards Mylar Film Glue for Polyester Fabrics
PES Hot Melt Adhesive Film Discription:
PES Hot Melt Adhesive Film
This product is a thermoplastic adhesive, PES Hot Melt Adhesive
Film which is suitable for a variety of uses on a wide range of
materials. It performs an excellent adhesion for textile,
polyester, cotton, blended fabric, PVC etc. This adhesive exhibit
excellent wash and dry cleaning resistance.
Milk white translucent
Melt Flow Index
Glassine release paper
Textile to fabric, PVC to fabric, veneer to MDF, embroidery, patch,
cloth label bonding.
A roll or two rolls in a carton if in stock. Quantity needs to be
negotiated if out of stock.
Second Flat Press:
1, Bonding temperature and pressure as well as the time involved in
the strength of the film to material. Bonding temperature must be
close to the machine set the temperature, the pressure must be
uniform, mold and pressure roller must be flat.
2, In different machinery and materials, the bonding conditions
used will be different. The conditions marked here are only basic.
The optimum bonding conditions should be made by creating suitable
construction conditions for the particular application damage,
direct or consequential, arising out of the use, misuse or
inability to use the product.
PES hot melt adhesive film of DS001TS, double sided with release
paper (We can make the thinnest thickness of 0.01mm, the thickest
of 0.5mm and the widest width of 150cm.):
Application of PES hot melt adhesive film (for bonding fabric to fabric, fabric to veneer, fabric to PVC,
embroidery, patch, label, woodworking, paper and so on):
Packing of PES hot melt adhesive film (Black PE bag can avoid the
sunlight, Anti-UV, extend product shelf life. Plugs can prevent the
film from being deformed by pressure.):
Equipments to test the PES Hot Melt Adhesive Film (We have a set of
complete testing equipments.):
1 . How about hot melt adhesive film?
It is just a film, and the basic material is release paper. But the
film is solid in room temperature, when reach its melt point,it is
able to bond other materials, Different materials of hot melt
adhesive film have different performances and different usages, we
need understand your demands,then recommend you right products to
2. Do you accept OEM or ODM?
Yes ,we accept OEM and ODM,we are professional heat transfer
material manufacturer ,having more than 10years experience.able to
assist you R&D new products. So if you need bonding some
special materials, please don’t hesitate to let us konw.
3. How do you transport the products?
If you are not urgent, we usually transport by ship because it is
the cheapest way. But for the West Asia area, we deliver by train
because there is no sea to ship. And for samples and urgent cargo,
we transport it by air as it is the fastest way.Of course if you
have other better idea about transport, we will accept it.
4. May I have your samples?
If you need some sample for reference,please let us know your fully
address/ship mode with courier,and we will arrange sample for your
5. How long is the lead time?
Sample lead time:3-7 days
Bulk lead time:7-10 days(depends on order quantity)
6. How do I pay for my order?
We accept L/C ,T/T ,Western Union , PayPal.